0.1250" × 0.5000" Dowel Pin — Stainless Steel 316
Precision turned to order in Stainless Steel 316. Marine-grade austenitic stainless — superior corrosion resistance.
Price
| Quantity | Per piece | Order total |
|---|---|---|
| 10 | $16.42 | $164.20 |
| 25 | $7.39 | $184.75 |
| 50 | $4.38 | $219.00 |
| 100 | $2.86 | $286.00 |
| 250 | $1.89 | $472.50 |
| 500 | $1.52 | $760.00 |
| 1,000 | $1.30 | $1300.00 |
Prices last updated —.
Specification
| Diameter | 0.1250" (3.175 mm) |
| Diameter tolerance | ±0.0005" (ISO shaft grade h7) |
| Length | 0.5000" (12.700 mm) |
| Length tolerance | ±0.005" |
| Material | Stainless Steel 316 |
| Ends | 45° chamfer both ends, or full radius — configurable |
| Weight per piece | 0.00177 lb |
Lead time
- Rush (2–3 days)
- Expedited (5–7 days)
- Standard (10–14 days)
About this size
This is the size range most precision assemblies actually use. A pin here carries enough shear strength for real location duty while still fitting the compact bolt patterns typical of surgical instruments, optical mounts and small fixtures. Two pins at this diameter, set as far apart as the part allows, will locate a plate far more repeatably than one larger pin in the middle.
316 is the default when the part will see saline, cleaning chemistry, or repeated autoclave cycles. The molybdenum addition over 304 buys meaningful pitting resistance, which is why it dominates medical and marine work. It is gummier to machine than the free-machining grades and work-hardens readily, so it is turned slower here — that shows up in the price rather than in the finished tolerance.
Specified in inches, this pin is turned to a fixed shop band rather than a computed ISO grade: h8 holds a thousandth, h7 half a thousandth, and h6 two tenths. That is usually how a US drawing calls out a locating pin, and it keeps the tolerance conversation in the same units as the hole it goes into. Inch stock also tends to be what a domestic shop already has on the shelf, which shows up in the lead time more than in the price.
Need a different length?
This page prices a 0.5000" pin, but the length is not fixed. The same 0.1250" diameter is turned to order at any length between 0.02" and 4" — enter the one you need and the price updates immediately.
That is usually the reason to have a pin made rather than bought. A standard pin comes in standard lengths, so an odd length means cutting one down, which leaves a raw end to re-finish and puts the length tolerance at the mercy of whatever did the cutting. A pin turned to length arrives finished on both ends and held to ±0.005". More on that on the custom length dowel pins page.
Order this pin
Open the configurator with this specification already filled in — adjust the ends, tolerance grade, quantity or lead time, and check out.
Configure 0.1250" × 0.5000" Dowel Pin →
Other Stainless Steel 316 sizes
This size in other materials
All Stainless Steel 316 dowel pins · All sizes and materials
← Back to the instant quote